28
2022
-
09
What are the processing precautions of alloy milling cutter manufacturers?
Alloy milling cutter is a kind of cutter with a blade similar to a ball head, which is assembled on a milling machine to mill various curved surfaces and arc grooves. Ball end milling cutter is also called R cutter.
Ball end milling cutter, capable of semi precision milling and precision milling of curved surface; Small ball end milling cutter can not only finish milling small chamfers of steep surfaces/straight walls, but also finish milling irregular contour surfaces. Rigidity of machine tool: try to use a machine tool with good rigidity. If the machine tool has poor rigidity, adjust the cutting parameters accordingly. Clamping and alloy end milling cutter runout: use a clamping system with good rigidity and high clamping accuracy. Detect and reduce tungsten steel milling cutter runout. Work piece clamping ensures that the work piece is clamped. If the clamping is not tight or vibration - adjust the cutting parameters accordingly. Cutting fluid and chip removal: ensure adequate coolant flow. Use adequate cooling during heavy rough machining When machining high hard steel, refer to the manual (dry cutting conditions, high-speed cutting application). Use air to blow chips during high-speed machining. Ensure that the chips are discharged smoothly at the machining position
Selection of alloy end milling cutter: check the detailed technical data, and select the correct end milling cutter according to the application and material. Each milling cutter manufacturer will have different options, so you can consult the manufacturer.
Cutting conditions: the recommended cutting parameters are usually better working conditions, such as machine rigidity or poor workpiece clamping force. These parameters need to be adjusted accordingly. The overhang of alloy end milling cutter should be as small as possible. If the overhang is too long, adjust the corresponding cutting parameters
Contact
Mob：18006561988（WeChat）
E-mail：2851620522@qq.com
Add：C0818, Measuring and Cutting Tools Trading Center, Zhejiang